Boemo bo phahameng ba ho ruta meno bakeng sa boikoetliso ba meno JPS-FT-III
E etselitsoe ho etsisa thuto ea bongaka
E etselitsoe bakeng sa papiso ea thuto ea tleliniki, thusa baithuti ho nts'etsapele boemo bo nepahetseng ba ts'ebetso thutong ea pele ho tleliniki, litsebo tsa ergonomic hantle ebe ba fetela kalafong ea 'nete ea bongaka.
KaJPS FT-III sisteme ea ho ruta meno ea meno, liithuti li ithuta ho tloha qalong, tlas'a maemo a sebele haholoanyane:
•Sebakeng sa pele ho tleliniki, baithuti ba ithuta ho sebelisa likarolo tse tloaelehileng tsa setsi sa kalafo mme ha ba tlameha ho ikamahanya le lisebelisoa tse ncha hamorao thutong ea bona.
• Optimum kalafo ergonomics le bophahamo-fetolehang ngaka ea meno le likarolo mothusi
• Tšireletso e molemo ka ho fetisisa ea bophelo bo botle ba liithuti, ka ho thibela likokoana-hloko tse kopanetsoeng, tse tsoelang pele le tse matla tsa lithapo tsa metsi tse ka hare
•Moetso o mocha: terei ea lisebelisoa tse peli, e etsa hore ts'ebetso ea matsoho a mane e phethahale.
• Leseli la ts'ebetso: khanya e ka fetoloa.
Ka mefuta e fapaneng ea meno
Manikin e tla le articulator ea makenete, e lumellana le mefuta e fapaneng ea meno
Etsisa tikoloho ea 'nete ea bongaka.
Li-motor tsa motlakase li tsamaisa motsamao oa manikin -------- etsisa tikoloho ea 'nete ea kliniki.
Ho bonolo ho hloekisa
Auto reset ts'ebetso ea sistimi ea manikin- fana ka bohloeki le ts'ebeliso ea sebaka Bokaholimo ba 'mabole bo bonolo ho bo hloekisa.
Linotlolo tse peli tse seng li setiloe
Likonopo tse peli tse behiloeng esale pele: S1, S2
Senotlolo sa ho seta bocha : S0
E ka behoa boemo bo phahameng ka ho fetisisa le bo tlaase ka ho fetisisa
Ka ts'ebetso ea ho emisa ts'ohanyetso
Hommization Suction botlolo ea metsi
Botlolo ea metsi a suction e etselitsoe hore e tlosoe le ho kenngoa habonolo haholo, e ntlafatsa ts'ebetso ea ho ithuta haholo.
Litsebi tsa ketsiso ea meno ea JPS, balekane ba tšepahalang, ba tšepahalang ka ho sa feleng!
Sebopeho sa sehlahisoa
Ntho | Lebitso la sehlahisoa | QTY | Ela hloko |
1 | Leseli la LED | 1 sete |
|
2 | Phantom e nang le 'mele | 1 sete |
|
3 | syringe ea litsela tse 3 | 1 pc |
|
4 | 4/2 sekoti se entsoeng ka letsoho | 2 likhomphutha |
|
5 | Ejector ea mathe | 1 sete |
|
6 | Ho laola maoto | 1 sete |
|
7 | Sistimi ea metsi a hloekileng | 1 sete |
|
8 | Sistimi ea metsi a litšila | 1 sete |
|
9 | Lekola le ho beha leihlo bracket | 1 sete | Taba ea boikhethelo |
Maemo a Mosebetsi
1.Mocheso oa tikoloho: 5°C ~ 40°C
2.Mongobo o amanang: ≤ 80%
3.Khatello ea mohloli oa metsi a ka ntle: 0.2 ~ 0.4Mpa
4.Khatello ea khatello ea kantle ea mohloli oa moea: 0.6 ~ 0.8Mpa
5.Matla: 220V + 22V ;50 + 1HZ
6.Matla: 200W
Sesebelisoa sa Thuto ea Meno
1.Moralo o ikhethileng, sebopeho se kopaneng, ho boloka sebaka, ho tsamaea ka bolokolohi, ho bonolo ho beha.Boholo ba sehlahisoa: 1250(L) *1200(W) *1800(H) (mm)
2.Phantom ke enjene ea motlakase e laoloang: ho tloha ho -5 ho isa ho 90 degrees.Boemo bo phahameng ka ho fetisisa ke 810mm, 'me bo tlaase ke 350mm.
3.ONE TOUCH reset ts'ebetso le tse peli tse behiloeng esale pele ts'ebetso ea phantom.
4.Terei ea lisebelisoa le terei ea mothusi lia chencha 'me lia phuthoa.
5.Sistimi ea tlhoekiso ea metsi e nang le botlolo ea metsi 600mL.
6.Sistimi ea metsi a litšila e nang le botlolo ea metsi a litšila ea 1,100mL le botlolo ea drainage ea makenete e loketse ho theoha kapele.
7.Ka bobeli li-tubes tsa letsoho tse phahameng le tse tlase li etselitsoe letsoho la 4 hole kapa 2hole.
8.Bokaholimo ba tafole ea 'mabole bo tiile ebile ho bonolo ho bo hloekisa.Boholo ba tafole ke 530( L )* 480 (W) (mm)
9.Mabili a mane a itšebetsang a sebetsang ka tlas'a lebokose a boreleli ho tsamaea le ho lula a tsitsitse.
10.Sistimi e ikemetseng ea metsi a hloekileng le metsi a litšila e bonolo ho e sebelisa.Ha ho hlokahale hore ho kenngoe liphaephe tse eketsehileng tse fokotsang litšenyehelo.
11.Sehokelo se potlakileng sa mohloli oa moea oa kantle se bonolo ho se sebelisa.
Li-monitor le li-microscopes le li-worksts ke boikhethelo
Simulator ea meno e nang le leihlo le sebaka sa ho sebetsa