-
JP-STE-18-D Autoclave Dental Instrument Sterilization
Description:
Pressure steam sterilizers such as dental clinics and laboratories are mainly used in unit operating rooms, dentistry, ophthalmology and biomedical research units, to sterilize items that can withstand pressure steam such as surgical instruments, dental instruments, dressings, glassware, etc. .
European B standard. It is suitable for sterilization of packaged, unpackaged, solid, Class A hollow, porous, and pipelined instruments; except for hollow instruments (such as high-speed dental drill handpieces), the air can make high-temperature steam reach every corner.
-
JP-STE-23D Autoclave Dental Instrument Sterilization
Specification
European class B Standard
More faster sterilization speed
2 vacuum pumps with ULVAC brand
10 programs USB port
Printer built-in
Chamber: Φ247mmX450mm
Power:2000W
-
JP-STE-8L-D QUICK Autoclave
Specification
Meeting to EN13060 European standard
With pre-post vacuum
Quick cycle only 10-12min
LED display
User friendly interface
Double locking system
-
JPSE-02 Sealing machine
Description:
The product is used long life heater, temperature adjustable, ultra high temperature automatic protection, such as design, has quick speed, stable performance, good appearance, the use of safe, easy to operate, and low repair rate, at the same time, the machine is a preheating, continuous use, avoid the damage caused by frequent use of heater, waiting time and reduce the seal, favored by the majority of hospital clinic.
-
Dental Handpiece Oil Lubricate Machine LUB 700
Description:
The high temperature and frequent use of the handpiece will damage and wear its bearings and the aging and deformation of the rubber gasket. In order to overcome this problem and extend the service life, it is necessary to strengthen the maintenance of the handpiece. After each use, you must add oil to the vent hole of the handpiece handle, and add oil before and after disinfection. Adding oil can protect and clean the bearing of the phone.
Oil Lubricate Machine LUB 700 is specially designed for the maintenance of handpiece. It has 3 high speed handpiece positions for 2 high speed /1 low speed E-type motor or 1 high speed /2 low speed E-type motor. The environment friendly design makes it popular among the users.
-
JPU-600D Ultrasonic Cleaner
Specification
Power Voltage: AC220V/50Hz or AC110V/60Hz
Fuse Tube: 2A, 250V
Ultrasonic Power: 120W
Heating Power: 150W
Time: 1~99Minutes
Temperature:20℃ ~ 80℃
-
JP-STE-12L-B Autoclave
Specification
European standard Class N
Thermodynamic vacuum system;
Sterilizing temperature: 121℃, 134℃
Chamber size: 230mm*360mm
LED display
-
JP-STE-8L 8L Class N Standard Cheap Dental Autoclave Sterilizer
Specification
European standard Class N
Thermodynamic vacuum system;
Chamber: 70x320mm
Nominal power: 1600VA
2 programs preset
Without print function
-
JP-STE-12L European Class B Standard Dental Autoclave
Specification
European standard Class B
Sterilization Method:Pressure steam
5 sterilization program：121 solid, 121 universal, 134 solid, 134 universal ,cotton
Sterilization Temperature: 121℃, 134℃
-
JPSE -03T Touch Screen Sealing machine
Specification:
Seal speed: 10±0.5m/min Power: 500W
Seal width: 12mm Weight: 18kg
Seal margin: 0-35mm Temperature range: 60-220℃
Temperature error ≤1% Dimension: 560 x260x 220mm
AC Power According to customer requirements
-
JPDW-01 Water distiller
Specification
Voltage: 220V/240V
Frequency: 50HZ
Power rating:750W
Distiller water: 1.5L/H
Chamber size: ￠180×200
Outside size: 290×290×390 mm
